Filter
Top Products
73
If the Following Appears on Your Display...
Useful Information
---Incomplete---
Phone book full
• When phone book item(s) was(were) sent to another
handset, the phone book memory was full and
copying stopped. Press [OFF] to exit (p. 43, 44). To
erase items from another handset phone book, see
page 42. You can copy all of the items again or copy
the items which have not been copied one by one
(p. 43, 44).
Example
Tom Jones
555-765-4321
• When you tried to send phone book items, the other
handset lost communication with the base unit, or
the other handset made an outside call by pressing
[C] or [s].
The handset displays the phone book item which
was not copied to the other handset. Press [OFF],
then try again (p. 43, 44).
No items stored • Your phone book is empty. No items were copied to
another handset.
Save error • The entered password was wrong in programming
the Dial Lock. Enter the correct password.
• While programming the Dial Lock, another handset
has changed the Dial Lock setting. Check whether
your desired setting has been complete or not.
Dial locked • The Dial Lock is turned on. If necessary, cancel the
Dial Lock (p. 55).
Line in use • The base unit or another handset is conducting an
outside call or a parallel connected telephone is in
use.
Line on hold • The base unit or another handset is on hold for an
outside call.
Display message Cause & Remedy