Filter
Top Products
Intercom
Telephone System
47
Voice Paging
The base unit user can make a voice announcement that is heard through the
speakers of all handsets.
• Only the handset user who answers first can talk with the base unit user.
• To answer the page from the handsets, see “Answering Intercom Calls” on
page 46.
• It is not possible to specify which handset will hear the voice announcement.
• If a handset is too close to the base unit, you may hear feedback while making the
voice announcement.
Place the handset on the base unit or charger or press [OFF].
• The announcement is heard at the handset ringer volume (p. 17).
1 Press [LOCATOR/INTERCOM].
• The SP-PHONE indicator lights.
2 To make a voice announcement to all handsets, press [3] ().
• You will hear a ringback tone (two short beeps) and the SP-PHONE indicator
flashes.
3 When the SP-PHONE indicator stops flashing, speak into the MIC.
• All handset users will hear your voice through their speakers after beeps, and
“Call from Base” will be displayed and the Ringer/Message Alert indicator
will flash rapidly on the handsets.
• The handset on the base unit will not be paged.
4 When stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM].
OR
When one of the handsets answers, talk into the MIC.
To disconnect the intercom, press [SP-PHONE] or [LOCATOR/
INTERCOM].
Base Unit
PAGE