Filter
Top Products
Remote Operation from a Touch Tone Phone
Answering System
For assistance, please call: 1-800-211-PANA(7262)
65
Direct Remote Operation
Once you have entered the remote code, you can also control your unit by direct
commands instead of using the voice menu. To end remote operation, hang up at
anytime.
Direct commands
To turn on the Answering System:
Call your unit and wait for 15 rings.
• The unit will answer and the greeting will be played.
• The Answering System will be turned on. Hang up or enter the remote code for
other options.
• When turning on the Answering System using a rotary or pulse service telephone,
you cannot enter the remote code for other options.
Skipping the greeting
After calling your unit, press [*] during the greeting.
• The unit skips the rest of the greeting and you can start recording your message
after the long beep.
[4] : Plays back new
messages.
[5] : Plays back all
messages.
[1] : Repeats the current
message.
• If pressed within the first
5 seconds of playback,
the previous message
will be played.
[2] : Skips the current
message.
[9] : Stops the current
operation.
• To resume, enter a direct
command within
15 seconds, or the voice
menu will start (p. 64).
[7] : Records a greeting
message.
After the long beep, talk for
up to 2 minutes.
Recording is stopped.
• The greeting is played.
[*] [4] : Erases the current
message.
• A short beep will sound
and the next message
will be played.
[*] [5] : Erases all messages.
• A long beep will sound
and “No messages” will be
heard.
[0] : Turns off the Answering
System.
• The unit hangs up.
[9]
PQQX13991YA.book 65 ページ ２００４年２月２５日 水曜日 午前１１時１２分