Filter
Top Products
Intercom
46
Answering Intercom Calls
When a handset is paged, it rings and the Ringer/Message Alert indicator flashes
rapidly. The display shows the calling extension.
• If the Auto Talk feature is turned on (p. 16), you can also answer a page by simply
lifting the handset off the base unit or charger.
When the base unit is being paged, it rings.
During an intercom call:
• If you have difficulty hearing while using the handset speakerphone and base
unit speaker, decrease the speaker volume by pressing VOLUME [] on the
base unit or [
d
] on the handset.
• If an incoming call is being received, you will hear two tones (incoming call
tone, page 53) and “ ” will flash rapidly on the base unit.
To answer the call;
— if using the handset, press [OFF], then [C] or [s].
— if using the base unit, press [SP-PHONE] twice.
1 Press [C], [s] or [HOLD/INTERCOM].
• You can also answer a call by pressing any button
except [
d
], [
B
] or [OFF].
2 To disconnect the intercom, press [OFF].
1 Press [SP-PHONE] or [LOCATOR/INTERCOM].
2 To disconnect the intercom, press [SP-PHONE] or [LOCATOR/
INTERCOM].
• When the ringer volume is turned off (p. 17, 18), the handset and the base unit
will ring at the low level for intercom calls.
• You cannot change the ringer tone for intercom calls.
• When the base unit user pages all handsets, only the handset user who
answers first can talk with the base unit user.
>
LINE IN USE
Handset
Call from Base
Call from HS[2]
Ex. Handset 2 calling
Ex. Base calling
Base Unit
PQQX13991YA.book 46 ページ ２００４年２月２５日 水曜日 午前１１時１２分