Filter
Top Products
Special Features
Telephone System
For assistance, please call: 1-800-211-PANA(7262)
53
Incoming Call Tone
During an intercom call (p. 45), you can be informed of incoming calls by two tones.
If this feature is turned on, incoming call tones will be heard for as long as the line is
ringing. If this feature is set to “2”, incoming call tones will be heard only 2 times.
If this feature is turned off, no tones will be heard. The factory preset is “2”.
Using the handset, this feature can be set separately for the handset and base unit.
Handset incoming call tone
Base unit incoming call tone
1 Press [MENU].
2 Scroll to “Ringer setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “Incoming call.” by pressing [
d
]
or [
B
], then press Select.
4 Select “On”, “Off” or “2” by pressing [
d
] or [
B
].
5 Press Save, then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “Set base unit” by pressing [
d
] or
[
B
], then press Select.
4 Scroll to “Incoming call.” by pressing [
d
]
or [
B
], then press Select.
5 Select “On”, “Off” or “2” by pressing [
d
] or [
B
].
6 Press Save, then press [OFF].
Handset Base Unit
Handset
Ringer setting
Back Select
K
d
BL
Incoming call.
Back Select
K
d
BL
Incoming call
tone :2
Back Save
K
d
BL
Handset
Initial setting
Back Select
K
d
BL
Set base unit
Back Select
K
d
BL
Incoming call.
Back Select
K
d
BL
Incoming call
tone :2
Back Save
K
d
BL
PQQX13991YA.book 53 ページ ２００４年２月２５日 水曜日 午前１１時１２分