Filter
Top Products
Programmable Settings
16
Line Mode
The line mode is preset to “B” and generally should not be adjusted. If “Line in
use” on the handset and “ ” on the base unit are not displayed properly,
the line mode selection is incorrect. Set line mode to “A”.
Auto Talk
The Auto Talk feature allows you to answer calls by simply lifting the handset off the
base unit or charger. You do not need to press [C] or [s]. The factory preset is
OFF.
• In order to view Caller ID information after you lift the handset to answer a call,
leave the Auto Talk feature turned off.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “Set tel line” by pressing [
d
] or
[
B
], then press Select.
4 Scroll to “Set line mode” by pressing [
d
] or
[
B
], then press Select.
5 Select “A” or “B” by pressing [
d
] or [
B
].
6 Press Save, then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “Auto talk” by pressing [
d
] or [
B
],
then press Select.
4 Select “On” or “Off” by pressing [
d
] or [
B
].
5 Press Save, then press [OFF].
Handset
LINE IN USE
Initial setting
Back Select
K
d
BL
Set tel line
Back Select
K
d
BL
Set line mode
Back Select
K
d
BL
Set line mode
:B
Back Save
K
d
BL
Handset
Initial setting
Back Select
K
d
BL
Auto talk
Back Select
K
d
BL
Auto talk
:Off
Back Save
K
d
BL
PQQX13991YA.book 16 ページ ２００４年２月２５日 水曜日 午前１１時１２分