Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/help 43
Answering system
Liquid damage
Caution:
LTo avoid permanent damage, do not use a microwave oven to speed up the drying
process.
The 2nd caller’s
information is not displayed
during an outside call.
LIn order to use Caller ID, Call Waiting, or Call
Waiting Caller ID (CWID), you must first contact
your telephone service provider and subscribe
to the desired service.
After subscribing, you may need to contact your
telephone service provider again to activate this
specific service, even if you already subscribed
to both Caller ID and Call Waiting with Caller ID
services (CWID).
Problem Cause/solution
I cannot listen to messages
from a remote location.
LA touch tone phone is required for remote
operation.
LEnter the remote code correctly (page 31).
L
The answering system is off. Turn it on (page 31).
The unit does not record
new messages.
LThe answering system is off. Turn it on (page 26,
31).
LThe message memory is full. Erase
unnecessary messages (page 28, 29).
LIf you subscribe to the Voice Mail service,
messages are recorded by the telephone
service provider not your telephone (page 31).
I cannot operate the
answering system.
LSomeone is operating the answering system.
LIf someone is talking on a conference call, you
cannot operate the answering system. Try again
later.
Problem Cause/solution
Liquid or other form of
moisture has entered the
handset/base unit.
LDisconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least 3
days. After the handset/base unit are completely
dry, reconnect the AC adaptor and telephone
line cord. Insert the batteries and charge fully
before use. If the unit does not work properly,
contact an authorized service center.
Problem Cause/solution
TG103x.book 43 ページ ２００８年１２月３日 水曜日 午後１２時５８分