Filter
Top Products
Preparation
14 For assistance, please visit http://www.panasonic.com/help
Display
Handset display items
Setting the unit before
use
Display language
You can select either “English” or
“Español” as the display language.
The default setting is “English”.
1 {MENU}
2 {V}/{^}: “Handset settings” i
{OK}
3 {V}/{^}: “Display settings” i
{OK}
4 {V}/{^}: “Change language” i
{OK}
5 {V}/{^}: Select the desired setting.
6 {OK} i {OFF}
Note:
LHow to change from Spanish back to
English:
1 {MENU}
2 {V}/{^}: “Ajuste portátil”
i {OK}
3 {V}/{^}: “Ajuste pantalla”
i {OK}
4 {V}/{^}: “Cambiar idioma” i
{OK}
5 {V}/{^}: “English“ i {OK} i
{OFF}
Voice guidance language
You can select either “English” or
“Español” as the voice guidance
language of the answering system. The
default setting is “English”.
1 {MENU}
2 {V}/{^}: “Answering device” i
{OK}
3 {V}/{^}: “Settings” i {OK}
4 {V}/{^}: “Voice prompt” i {OK}
5 {V}/{^}: Select the desired setting.
6 {OK} i {OFF}
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 {MENU}
2 {V}/{^}: “Set tel line“ i {OK}
3 {V}/{^}: “Set dial mode“ i
{OK}
4 {V}/{^}: Select the desired setting.
5 {OK} i {OFF}
Displayed
item
Meaning
w Within range of the base
unit
LWhen flashing:
Handset is searching
for base unit. (out of
range of base unit,
handset is not
registered to base
unit, no power on
base unit)
5 Battery level
Example:
[1]
The handset’s
extension number
(example shown here:
handset 1)
In use Line or answering
system is being used by
another handset or the
base unit.
TG103x.book 14 ページ ２００８年１２月３日 水曜日 午後１２時５８分