Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/help 41
Battery recharge
Making/answering calls, intercom
Problem Cause/solution
I fully charged the
batteries, but 7
continues to flash.
LClean the charge contacts and charge again
(page 11).
LThe batteries may need to be replaced with a
new ones (page 10).
I fully charged the
batteries, but the operating
time seems to be short.
LWipe the battery ends (S, T) and the unit
contacts with a dry cloth.
The handset display is
blank.
LConfirm that the batteries are properly installed.
LFully charge the batteries (page 10, 11).
Problem Cause/solution
w is displayed, but I
cannot make a call.
LThe handset and base unit could not
communicate for some reason, such as
interference from other electrical appliances.
Perform the following:
– Move the handset and base unit away from
other electrical appliances.
– Move closer to the base unit.
Static is heard, sound cuts
in and out. Interference
from other electrical units.
LMove the handset and base unit away from
other electrical appliances.
LMove closer to the base unit.
LIf your unit is connected to a telephone line with
DSL service, we recommend connecting a noise
filter between the base unit and the telephone
line jack. Contact your DSL provider for details.
The handset does not ring. LThe ringer volume is turned off. Adjust it (page
24).
I cannot make a call. LThe dialing mode may be set incorrectly.
Change the setting (page 14).
LAnother handset is in use. Try again later.
I cannot have a
conversation using the
headset.
LMake sure that an optional headset is
connected properly (page 38).
I cannot make long
distance calls.
LMake sure that you have long distance service.
I cannot page the handset. LThe called handset is too far from the base unit.
LThe called handset is in use. Try again later.
TG103x.book 41 ページ ２００８年１２月３日 水曜日 午後１２時５８分