Filter
Top Products
1.2 Making Calls
User Manual 21
To select an idle outside line in the specified outside line group automatically (Outside
Line Group Access)
To select the specified outside line
• Each of the S-CO button or G-CO button light shows the current status as follows:
Off: The line is idle.
Red on: The line is in use.
• You may be restricted from making a call to fthe specified outside party. To make a call, refer
to "1.2.7 Calling without Restrictions".
• To confirm number before dialling, you can enter a phone number and confirm it on the
display and then go off-hook. (Predial)
• Call Charge Reference
You can confirm your total call charges by pressing the Charge Reference button.
• To make a call to another party without going on-hook, press the FLASH/RECALL
button. It will reaccess the outside line and return external dial tone. The Terminate button
will return intercom dial tone. You can dial the new phone number without going on/off-hook.
Customising Your Phone
• 3.1.2 Settings on the Programme Mode–Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
• 3.1.3 Customising the Buttons
Create or edit a Loop-CO (L-CO) button, a Group-CO (G-CO) button, a Single-CO (S-
CO) button, a Terminate button or a Charge Reference button.
PT and SLT
PT/SLT/PS
Off-hook. Talk.
Press G-CO or enter outside
line group access number
and then outside line group
number (2 digits).
Dial outside phone
number.
outside
phone no.
OR
(G-CO)
8
outside line
group no.
PT and
PT/PS
Off-hook.
Talk.Press S-CO.
(S-CO)
Dial outside phone
number.
outside
phone no.