Filter
Top Products
1.1 Before Operating the Telephones
User Manual 15
Customising Buttons
If the term is in parentheses like (Account) in this section, it means a flexible button has been made
into an "Account" button. To customise, refer to "3.1.3 Customising the Buttons".
Programmable Feature (PF):
Located on the upper part of the CO
button array or on the DSS Console.
Assigns the desired button and used to
access the stored feature. Mostly used
as a One-Touch Dialling button. (Only
the "F and number" may be shown on
some telephones.)
MODE:
Used to shift the display to access
various features.
SELECT:
Used to select the displayed item or to
call the displayed phone number.
SHIFT:
Used to access the second level of
Soft button features.
ENTER:
Used to confirm the selected item.
CANCEL:
Used to cancel the selected item.
Buttons Feature
Loop-CO (L-CO)
Used to access an idle outside line for making outside calls.
Incoming outside calls from any outside line arrive at this button.
Group-CO (G-CO)
Used to access an idle outside line in a specified outside line group for
making outside calls.
Incoming calls from outside lines in the assigned outside line group arrive
at this button.
Single-CO (S-CO)
Used to access a specified outside line for making or receiving outside
calls.
Direct Station Selection (DSS)
Used to access an extension with one-touch.
It is also possible to be changed to the other feature button.
One-touch Dialling Used to access a desired party or system feature with one-touch.
Incoming Call Distribution
Group (ICD Group)
Used to access a specified incoming call distribution group for making or
receiving calls.
Message
Used to leave a message waiting indication or call back the party who left
the message waiting indication.
Message for another extension Used to have a Message button for another extension.
Call Forwarding (FWD)/Do Not
Disturb (DND)—Both calls
Used to forward all calls to a specified destination or refuse.
FWD/DND—Outside calls Used to forward outside line calls to a specified destination or refuse.
FWD/DND—Intercom calls Used to forward intercom calls to a specified destination or refuse.
Group FWD—Both calls Used to forward all the calls to your group to specified destination.
Group FWD—Outside calls
Used to forward the outside line calls to your group to a specified
destination.
(PF)
MODE
SELECT SHIFT