Filter
Top Products
Answering System Operations with the Handset
82
During Playback of a Recorded Message
To repeat a message
Press to display “Repeat Msg”, then
press .
OR
Press .
•If you press within 5 seconds from start
playback, the previous message will be played.
•If you press over 5 seconds from start playback,
the current message will be played.
1
To skip a message
Press . Press or until the arrow
points to “Skip Msg”, then press .
OR
Press .
•The next message will be played if recorded.
2
To stop a message
Press . Press or until the arrow
points to “Stop”, then press .
OR
Press .
•
The display will return to “Remote Operation”. To return
to the standby mode, press or wait for 30 seconds.
9
To record a memo message
with direct command
1
Press (INT) then .
2 Press then .
3 After the long beep, talk clearly, about
20 cm away from the MIC (microphone)
on the handset.
•The display will start showing the length of
the recording time.
4 When finish recording, press .
•A beep sounds.
•The display will return to “Remote
Operation”. To return to the standby
mode, press or wait for 30
seconds.
9
4
7
To record a memo message
with function menu
1
Press (INT) then .
2 After the function menu is displayed,
press or until the arrow points to
“Record”, then press .
3 Press or to select “Record
Memo”, then press .
4 After the long beep, talk clearly, about
20 cm away from the MIC (microphone)
on the handset.
•
During recording, the arrow points to “Stop”.
5 When finish recording, press .
•A beep sounds.
•The display will return to “Remote
Operation”. To return to the standby
mode, press or wait for 30 seconds.
Record
Answer ON
H
Stop
Remote Operation
74
00-00
KX-TCD735ALM(E)-4(76~100) 2002.06.21 5:30 PM Page 82