Filter
Top Products
62
Call Option
5 Enter the 4-digit handset PIN (p. 52).
•The current mode is displayed.
6 Press or to select “ON” or
“OFF”, then press .
•A beep sounds and “ ” is displayed if
ON is selected.
•The display will return to “Call Bar”. To
return to the standby mode, press
or wait for 60 seconds.
•You can exit the programming mode any time
by pressing . If you forget your PIN
code, please consult your nearest Panasonic
Service Centre.
with the Handset
Call Prohibition
You can prohibit anyone from making a call with your handset except for emergency calls. Incoming
calls are accepted. The factory preset is OFF.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1 Press .
2 Press or until the arrow points to
“Setting Handset”, then press .
3 Press or until the arrow points to
“Call Option”, then press .
4 While “Call Bar” is at the arrow, press
.
Enter H/set PIN
12345678900:
----
To set the call prohibition mode ON/OFF
KX-TCD735ALM(E)-3(50~75) 2002.06.21 6:16 PM Page 62