Filter
Top Products
79
Chapter 5
Answering System
To erase your own greeting message with direct command
During playback your own greeting message, press then .
•A recording of your own greeting message is erased.
•The display will return to “Remote Operation”. To return to the standby mode, press
or wait for 30 seconds.
6
To set the answering system
ON/OFF
See basic answering system operations (p. 17).
1 Press (INT) then .
2 Press to set ON, or press to set
OFF.
•“[A]” is displayed in the standby mode if
set to ON.
•The display will return to “Remote
Operation”. To return to the standby
mode, press or wait for 30
seconds.
0
8
To playback your own greeting
message
1 Press (INT) then .
2 After the function menu is displayed,
press or until the arrow points
to “Play OGM”, then press .
OR
Press .
•A recording of your own greeting message
is played back.
•If your own greeting message is not
recorded, one of 2 pre-recorded greeting
messages is played back.
•The display will return to “Remote
Operation”. To return to the standby
mode, press or wait for 30
seconds.
6
KX-TCD735ALM(E)-4(76~100) 2002.06.21 5:30 PM Page 79