Filter
Top Products
64
Other Option
with the Handset
Selecting the Battery Type
Two Nickel Metal-hydride (Ni-MH) batteries are included with this unit. Nickel Cadmium (Ni-Cd)
rechargeable batteries can also be used. If you replace the batteries with Ni-Cd batteries, you must
set the battery type selection to “Ni-Cd”, or the battery strength will not be displayed correctly. The
factory preset is “Ni-MH”.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1 Press .
2 Press or until the arrow points
to “Setting Handset”, then press
.
3 Press or until the arrow points
to “Other Option”, then press .
4 Press or until the arrow points
to “Battery Type”, then press .
•The current battery type is at the arrow.
5 Press or to select “Ni-Cd” or
“Ni-MH”, then press .
•The display will return to the “Battery
Type”. To return to the standby mode,
press or wait for 60 seconds.
•Incorrect battery type selection may shorten
battery life.
In “Other Option” menu, Changing the 4-digit handset PIN (p. 52), To set the auto talk
feature ON/OFF (p. 21) are also available.
KX-TCD735ALM(E)-3(50~75) 2002.06.21 5:24 PM Page 64