Filter
Top Products
Tone Option
58
1 Press .
2 Press or until the arrow points
to “Setting Handset”, then press
.
3 Press or until the arrow points
to “Tone Option”, then press .
4 Press or until the arrow points
to “Range Alarm”, then press .
•The arrow points to the current setting.
5 Press or to select “ON” or
“OFF”.
6 Press .
•A beep sounds.
•The display will return to “Range
Alarm”. To return to the standby mode,
press or wait for 60 seconds.
•You can exit the programming mode any time
by pressing .
with the Handset
Setting the Range Warning Alarm ON/OFF
The factory preset is OFF.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
Setting the Battery Low Alarm ON/OFF
The factory preset is ON.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1
Press .
2 Press or until the arrow points
to “Setting Handset”, then press
.
3 Press or until the arrow points
to “Tone Option”, then press .
4 Press or until the arrow points
to “Battery Alarm”, then press .
•The arrow points to the current setting.
5 Press or to select “ON” or
“OFF”.
6 Press .
•A beep sounds.
•The display will return to “Battery
Alarm”. To return to the standby mode,
press or wait for 60 seconds.
•You can exit the programming mode any time
by pressing .
KX-TCD735ALM(E)-3(50~75) 2002.06.21 5:24 PM Page 58