Filter
Top Products
6
Connections
Plug in the AC Adaptor and the telephone line cord to the rear of the unit. Then
connect the cord as shown.
Getting Started
LINE
9
v
Fasten the AC adaptor cord
to prevent it from being
disconnected
Hook
USE ONLY WITH Panasonic AC ADAPTOR PQLV1CE.
• Be careful not to confuse the telephone line jack with the AC adaptor jack on
the base unit. If connected improperly, the base unit will not work and damage
may occur.
• The AC Adaptor must remain connected at all times. (It is normal for the
adaptor to feel warm during use.)
• If your unit is connected to a telephone line or PBX which does not support
Caller ID services, you cannot access those services.
• The unit will not work during a power failure. We recommend you connect a
standard telephone on the same line for power protection.
To Power Outlet
(AC 230V, 50Hz)
AC Adaptor
Telephone Line Cord
To Single-Line Telephone Jack
Fasten the AC adaptor cord
to prevent it from being
disconnected
30401 English KX-TCD700NL 25/4/01 2:31 pm Page 6