Panasonic KX-TCD700NL Telephone User Manual


  Open as PDF
of 56
 
• 3 seconds is selected.
ZAor B to
select Pause time.
eg.
1 = 3 seconds
2 = 5 seconds.
• Select Pause Timing.
ZC
• Enter PIN (4 digits)
ZC
• Select Flash Timing.
ZC
• Enter PIN (4 digits)
ZB
Select Earth/Flash Mode
The earth relay can be installed as an option depending on your PBX requirements.
Please consult your nearest Panasonic Service Centre for installation. Then you can
select the flash or earth mode. The factory pre-set is Flash.
Select Pause Timing
You can set the pause timing to 3 or 5 seconds, depending on your PBX
requirements. The factory pre-set is 3 seconds.
(Standby Mode)
• Select Earth.
ZC
• Enter PIN (4 digits)
ZB
Z
Y
or V
Z
S
or U
Z
Y
or V
-1-888888801
ÂÊÁËÈÍ
ÎÏÔÓÒ
new speed
ÂÊÁËÈÍ
ÎÏÔÓÒ
setting bs
ÂÊÁËÈÍ
ÎÏÔÓÒ
input code
 ÊÁËÈÍ
ÎÏÔÓÒ
3221
 ÊÁËÈÍ
ÎÏÔÓÒ
• Current setting is displayed.
1 = Flash
2 = Earth
ZB
• Earth is selected.
Current setting is displayed.
ZAto select Flash.
(If Flash is already selected
ZY).
eg. Flash 1 is selected.
ZYor V
• A confirmation tone
sounds.
• Display returns to function
menu.
eg. Earth is selected.
ZYor V
3222
 ÊÁËÈÍ
ÎÏÔÓÒ
33-123456
 ÊÁËÈÍ
ÎÏÔÓÒ
3222
 ÊÁËÈÍ
ÎÏÔÓÒ
setting bs
ÂÊÁËÈÍ
ÎÏÔÓÒ
• A confirmation tone
sounds.
• Display returns to function
menu.
setting bs
ÂÊÁËÈÍ
ÎÏÔÓÒ
3221-2
 ÊÁËÈÍ
ÎÏÔÓÒ
• Current setting is displayed.
1=Flash 1 (700m sec)
2=Flash 2 (110m sec)
ZA- B to select
Flash time.
3221-1
 ÊÁËÈÍ
ÎÏÔÓÒ
ZYor V
• A confirmation tone
sounds.
• Display returns to
function menu.
setting bs
ÂÊÁËÈÍ
ÎÏÔÓÒ
➡ Programmable Functions (On the Base Unit)
42
30401 English KX-TCD700NL 25/4/01 2:32 pm Page 42
 previous next