Panasonic KX-TCD700NL Telephone User Manual


 
45
Automatic Route Selection
Automatic Route Selection (ARS) is a feature which selects the least expensive
carrier service when making long distance calls.
1. After subscribing to a 2nd carrier service, store the 2nd carrier code.
2. Then store the area codes (up to 25 codes) 2nd carrier service charge rates
are higher than the first carrier service.
3. When one of the area codes are dialled, the 2nd carrier code will be used. If
you do not store any area codes, all phone numbers will be dialled with the
2nd carrier code.
Example: Second carrier code: 1603 (The second service is cheaper).
Area code: 0113
Dialled number: 0113-055789 Sent number: 0113-055789.
Dialled number: 0114-055789 Sent number: 1603-0114-055789.
When dialling the area code, do not leave a long pause between numbers. If
there are pauses, a busy tone will be heard and you will not be able to finish
dialling the number.
Please contact your telephone company regarding the carrier telephone
charges.
Storing the Carrier Code
-1-888888801
ÂÊÁËÈÍ
ÎÏÔÓÒ
(Standby mode)
new speed
ÂÊÁËÈÍ
ÎÏÔÓÒ
ZY or V
setting bs
ÂÊÁËÈÍ
ÎÏÔÓÒ
ZS or U
ZY
or V
input code
 ÊÁËÈÍ
ÎÏÔÓÒ
The current setting is displayed.
0 = ARS OFF
1 = ARS ON.
ZAto select ON.
Enter carrier code (max 7 digits).
ZYor V
A confirmation tone sounds and
code is stored.
ZI
Enter PIN (4 digits).
9 œœœœ000000
 ÊÁËÈÍ
ÎÏÔÓÒ
91œ0œ0000000
 ÊÁËÈÍ
ÎÏÔÓÒ
91œ1–0000000
 ÊÁËÈÍ
ÎÏÔÓÒ
91œ1–1603
 ÊÁËÈÍ
ÎÏÔÓÒ
91œ1–0000000
 ÊÁËÈÍ
ÎÏÔÓÒ
ZA
30401 English KX-TCD700NL 25/4/01 2:32 pm Page 45