Filter
Top Products
➡
47
Using International Carrier services
Automatic Route Selection (ARS) is also used for international calls.
After subscribing to a second international carrier service, store the second
international carrier code (see page 45). Store “00 (international code)” and those
country codes (up to 25 codes) instead of area codes (see page 44).
Example: Second international carrier code: 1605
Country code: 0033 (The first carrier service is cheaper.)
Dialled number: 0033-55789 → Sent number: 0033-55789
Dialled number: 0044-55789 → Sent number: 1605-0044-55789
• If you stored a phone number with “00” in the speed dialling memory and use a
second carrier service which does require “00”, turn the “00” delete mode ON.
To turn the international code “00” delete mode ON/OFF
Some international carrier services do not require “00” before the country code.
In this case, turn the delete mode ON by programming. “00” will automatically be
deleted when dialling. The factory pre-set is OFF.
Example: Second international carrier code: 1888 (This service does
not require “00”.)
Delete mode: ON
Dialled number: 0044-55789 → Sent number: 1888-4455789
(Standby mode)
-1-888888801
ÂÊÁËÈÍ
ÎÏÔÓÒ
new speed
ÂÊÁËÈÍ
ÎÏÔÓÒ
ZYor V
setting bs
ÂÊÁËÈÍ
ÎÏÔÓÒ
ZSor U
ZY
or V
input code
 ÊÁËÈÍ
ÎÏÔÓÒ
ZI
ZC
ZY
• Enter PIN (4 digits).
• The current setting
is displayed
0 = OFF
1 = ON
ZA
9œœœœ0000000
 ÊÁËÈÍ
ÎÏÔÓÒ
930œœ0000000
 ÊÁËÈÍ
ÎÏÔÓÒ
931œœ0000000
 ÊÁËÈÍ
ÎÏÔÓÒ
9œœœœ0000000
 ÊÁËÈÍ
ÎÏÔÓÒ
30401 English KX-TCD700NL 25/4/01 2:32 pm Page 47