Filter
Top Products
Operation
50 User Manual
To call an extension who is refusing to receive the call (Do Not Disturb [DND]
Override)
Changing the dialling mode (Pulse to Tone Conversion)
To access services such as computer telephone services, Voice Mail, etc., that require a tone dialling,
you can temporarily change the dialling mode from Pulse to Tone, if you are using a dial pulse type
CO line.
• Only a pre-programmed extension can execute this feature.
• If you hear a reorder tone after pressing "Over" or dialling "2 (or 1)," you are not permitted
to execute this feature by System Programming.
Press "Over" or dial 2 (or 1)*.
OR
While hearing the DND tone
PT / SLT
Over
2
(or )*
1
*) 2: [SA], 1: Others
Enter
desired number.
desired no.
Dial #.
After the line is connected
PT / SLT
#