Filter
Top Products
Operation
112 User Manual
2.7.2 Refusing Incoming Calls (Do Not Disturb [DND])
To set/cancel
You may set this feature during a meeting or when
you are busy.
• A flashing CO button tells you an outside call is received. You can answer the call by
pressing the flashing CO button.
• While setting, you can temporarily cancel this feature by pressing the FWD/DND button.
Pressing the FWD/DND button alternates between setting or cancelling the mode.
• You can set the "Do Not Disturb" and "Call Forwarding" features at the same time.
However, only one feature will work at a time. You can change the feature by pressing the
FWD/DND button while on-hook. Pressing the FWD/DND button changes the feature as
follows:
Off-hook.
Press FWD/DND
or dial 710.
OR
On-hook.
Dial 1 to set
or 0 to cancel.
Set
Cancel
OR
PT / SLT
C.Tone
7 1 0
1
0
FWD/DND
Off-hook.
Press FWD/DND.
On-hook.
Press "FWD/DND Cancel" to
cancel or "Do Not Disturb" to set.
T7536 / T7235
C.Tone
Set
Cancel
FWD/DND Cancel
Do Not Disturb
FWD/DND
DND FWD OFF