Filter
Top Products
1.
Follow steps 1–3 on page 70.
2.
Rotate to select
“YES”.
3.
Press .
4.
Press again.
5.
Press .
MENU
SET
SET
EASY DIAL
#80
To reset the advanced features,
except ECM selection (feature #68
on page 70) to their default settings
SET DEFAULT
YES
NO
Features Summary
71
You can confirm the status of the
other party’s machine.
●
If the ring back tone continues, the
other party’s machine may not be
a facsimile or may have run out of
paper. Check with the other party.
●
The connecting tone volume
cannot be adjusted.
#76
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones; fax
tone, ring back tone and busy tone.
CONNECTING TONE
ON
OFF
Code Display & Feature Settings How the unit operates
(The default setting is in bold type.)
#71
To set the ring melody
MELODY RINGER
A
B
C
See page 49 for details.
#70
(KX-FP181)
(KX-FP185)
If you have a pager and wish to
know when your unit receives an
incoming message (KX-FP185
only) or a fax, activate this feature.
PAGER CALL
FAX PAGER CALL
ON
OFF
See pages 44 and 45 for details.
TAD/FAX
FAX ONLY
TEL/FAX
#78
If you use an extension telephone
in the TEL/FAX mode, select the
desired number of rings of the
extension telephone.
TEL/FAX RING
1, 2, 3, 4, 5,
6, 7, 8, 9
#77
■
For KX-FP181 only
To change the receive mode in the
AUTO ANSWER setting
AUTO ANSWER
FAX ONLY
TEL/FAX
“FAX ONLY”: Facsimile only mode
(p. 41)
“TEL/FAX”: Telephone/Facsimile
mode (p. 44, 45)
“TAD/FAX”: Telephone Answering
Device/Facsimile mode (p. 52)
“FAX ONLY”: Facsimile only mode
(p. 41)
“TEL/FAX”: Telephone/Facsimile
mode (p. 44, 45)
#77
■
For KX-FP185 only
To change the receive mode in the
AUTO ANSWER setting
AUTO ANSWER