Filter
Top Products
33
Sending Faxes
1
Insert the document FACE DOWN.
●
If necessary, press
repeatedly to select the desired setting
(p. 30).
2
Enter the fax number using the dial keypad
or .
3
Press .
●
The document will be fed into the unit and
scanned into memory.
After storing all of the pages, the unit will
transmit the document.
●
The amount of memory used will be shown
as a percentage on the display.
Display:
Amount of memory used (%)
●
The stored document will be automatically
erased after transmission.
PAGES=01 05
QUICK SCAN
EASY DIAL
RESOLUTION
FACE DOWN
QUICK SCAN
Display
RESOLUTION
STOP
EASY DIAL
Sending from memory!
The unit is able to scan documents, store them in memory, and then transmit them from
memory. The memory capacity is approx. 25 pages based on the ITU-T No. 1 Test Chart in
standard resolution (p. 86).
Note:
●
If you select the “FINE”, “SUPER FINE” or “HALF
TONE” resolution, the number of pages that the unit
can transmit will decrease.
●
If the stored pages exceed the memory capacity, the
transmission will be cancelled.
To cancel the memory transmission
Press while or after scanning the
document.
STOP
1
Press twice.
Display:
2
Press .
3
Insert the document FACE DOWN until a
single beep is heard and the unit grabs the
document.
4
Press and dial the
fax number.
●
You can also use the handset.
5
When a fax tone is heard, press
.
FAX START
DIGITAL SP-PHONE
SET
1.SEND GUIDE
HELP
To transmit, insert the
document face down until you
hear the beep.
Voice guide:
Press the speaker phone
button, then dial the phone
number. When the fax tone is
heard, press the start button.
Start transmission.
Sending a fax with the voice guide (KX-FP185 only)!