Filter
Top Products
Voice guidance examples:
“
Start transmission.
”
“
Transmission is complete.
”
“
Transmission has failed.
”
“
Transmission has been interrupted.
”
“
Start reception.
”
“
Reception is complete.
”
“
Reception has failed.
”
“
Reception has been interrupted.
”
“
Please hang up the handset for
reception.
”
“
Start reception.
”
“16s”: Up to 16 seconds
“60s”: Up to 60 seconds
Features Summary
69
Code Display & Feature Settings How the unit operates
#44
To alert you with beeps when a
received document is stored into
memory due to a problem.
RECEIVE ALERT
ON
OFF
If you hear slow beeps, clear the
printing problem or supply paper to
print the stored document. The
beeps will stop.
If you hear slow beeps, erase the
recorded messages (p. 57). The
beeps will stop.
#43
■
For KX-FP185 only
To alert you with beeps when there
is less than 60 seconds of
remaining recording time
REC. TIME ALERT
ON
OFF
(The default setting is in bold type.) (continued)
#46
To receive a fax automatically
when you answer a call and hear
a fax calling tone (slow beep).
FRIENDLY RCV
ON
OFF
“ON”: You do not have to press
for fax reception.
FAX START
#49
■
For KX-FP181 only
To answer a call with an extension
telephone in the TEL/FAX mode
(p. 45)
AUTO DISCONNECT
ON /
CODE= 0
OFF
1. Follow steps 1–3 on page 68.
2. Rotate to select “ON”.
3. Press .
4. Enter your code from 2 to 4 digits,
using 0–9 and .
5. Press .
6. Press .
MENU
SET
SET
EASY DIAL
#54
■
For KX-FP185 only
To change the recording time for
your own TAD/FAX greeting
message (p. 54)
GREETING TIME
16s
60s
#47
ON
OFF
ERROR
■
For KX-FP185 only
If you wish to hear the voice
guidance (see right) at each fax
transmission/reception, set this
feature to “ON”.
●
To hear the voice guidance only
when fax transmission/reception
fails, select “ERROR”.
FAX GUIDANCE