Panasonic KX-FP181E Answering Machine User Manual


 
37
Sending Faxes
Sending to pre-programmed parties in the broadcast memory
The same document will be sent to the specific parties whose numbers are stored in broadcast
memory.
The fax memory capacity for transmission is approx. 25 pages based on the ITU-T No. 1 Test
Chart in standard resolution (p. 86).
1
Insert the document FACE DOWN.
If necessary, press
repeatedly to select the desired setting
(p. 30).
2
Rotate until the following is
displayed.
Display:
3
Press .
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (see below).
FAX START
<BROADCAST>
EASY DIAL
RESOLUTION
FACE DOWN
STOP
Display
RESOLUTION
FAX START
SET
EASY DIAL
Note:
If you select the “FINE”, “SUPER FINE” or “HALF
TONE” resolution, the number of pages that the unit
can transmit will decrease.
If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialled up to 5 times after all of the other stations
have been called.
To cancel the broadcast setting
1. Press while the unit displays the
following message.
Display:
The display will show the following.
2. Press .
SET
YES:SET/NO:STOP
SEND CANCELLED?
BROADCASTING
STOP
NO.
01
02
03
04
Mike
Peter
Sam
Kim
USAGE TIME
01'10
01'08
01'09
01'10
004'37
PAGES
02
02
02
02
008
OK
OK
OK
OK
START TIME
10 Jan. 2000 09:36
YOUR LOGO :
YOUR FAX NO. :
10 Jan. 09:31
10 Jan. 09:33
10 Jan. 09:34
10 Jan. 09:35
TOTAL
RESULT
OTHER FACSIMILE
BROADCAST REPORT
Sample of a broadcast sending report