Filter
Top Products
Features Summary
68
#41
If you use an extension telephone
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 47).
●
This code is also used to receive
a voice message and a fax in the
same call (p. 43)(KX-FP181 only).
FAX ACTIVATION
ON /
CODE= 9
OFF
1. Follow steps 1–3 above.
2. Rotate to select “ON”.
3. Press .
4. Enter your code from 2 to 4 digits,
using 0–9 and .
5. Press .
6. Press .
●
Do not enter “0000”.
MENU
SET
SET
EASY DIAL
#42
■
For KX-FP185 only
To alert you with beeps when a
new voice message is recorded
MESSAGE ALERT
ON
OFF
If you hear slow beeps, press
and listen to
recorded messages (p. 56). The
beeps will stop.
PLAY MESSAGES
#39
To adjust the display contrast
LCD CONTRAST
NORMAL
DARKER
“NORMAL”: For normal contrast
“DARKER”: Used when the display
contrast is too light.
1. Press .
2. Rotate until “ADVANCED
MODE” is displayed.
Press and rotate until
the desired feature is displayed.
EASY DIAL
SET
EASY DIAL
MENU
Programming table (cont.)
Note:
●
Step 4 may be slightly different depending on the
feature.
●
See page 64 for more details.
Advanced features (cont.)!
How to set menu options
Code Display & Feature Settings How the unit operates
(The default setting is in bold type.)
Setting
Recording paper Original document
100% A4 Letter
92% A4 A4
86% A4 A4
72%
A4
Legal
#36
If the size of the document sent by
the other party is as large as, or
larger than the recording paper, the
unit can reduce and print the
document.
Select the desired reduction rate.
RCV REDUCTION
100%
92%
86%
72%
●
If most of document sent from the
other party are as long as your
recording paper and they have a
long heading using a few lines,
we recommend selecting 86%.
3. Press .
4. Rotate until the desired
setting is displayed.
5. Press .
6. Press .
MENU
SET
EASY DIAL
SET