Filter
Top Products
EN
NOTE: - As you scroll through the ringer settings, the phone emits the corresponding
ringer tone level accordingly.
- If you turn the ringer off, the display shows
RINGER = OFF
when the phone
is in standby mode.
3. Press the ringer HI/LO/OFF button to store. If a change is made, you will hear a con-
firmation tone, and
SET RINGER TONE
shows in the display.
4. Use the CID VOL(+) / CID VOL(-) arrow keys to select
1, 2, 3
. Ringer tone
2
is the default.
NOTE: As you scroll through the ringer tone settings, the phone emits the corresponding
ringer tone accordingly.
5. Press the ringer HI/LO/OFF button again to store. (if a change is made, you will hear a
confirmation tone).
There are four programmable menus available: Language, Area Code, Tone/Pulse Dialing and
Default Setting.
NOTE: - To program these settings, the handset should be OFF (not in TALK mode).
- Press the TONE*/exit button to return to standby mode.
Set the display language to show messages in either English, French or Spanish.
1. Press flash/program button until
SET LANGUAGE ENG FRA ESP
shows in the display.
2. Use the CID VOL(+) / CID VOL(-) arrow keys to select
ENG
(English),
FRA
(French) or
ESP
(Spanish). English is the default.
3. Press the flash/program button to store (if a change is made, you will hear a confirmation tone).
1. Press flash/program button until
SET AREA CODE - - -
shows in the display with the first digit
blinking.
2. Use the dial pad to enter your local area code.
3. Press the flash/program button to store (if a change is made, you will hear a confirmation tone).
SET RINGER TONE
>1 2 3
SYSTEM SETUP
LANGUAGE
LOCAL AREA CODE
18
os6976-en1.p65 5/20/2005, 12:09 PM21