Filter
Top Products
EN
Cut out the template on the line indicated. The template size and screw hole positions are identical
to the top of the unit.
1. If your cabinet does not have an overhang:
a) Position the template in the desired location on the underside of the cabinet, flush with the
front edge of the cabinet.
b) Tape the template in place and go to step 2.
If your cabinet has an overhang:
a) Measure the thickness of the overhang.
b) Fold the front of the template downward along the printed guideline closest to the thickness
of your cabinet.
c) Tape folded-down portion to backside of the overhang, and tape the template to the cabinet
underside.
3/8” Minimum
Front edge of cabinet
Mounting template
Measure the
thickness of
cabinet overhang
Fold template on
dotted line
MOUNTING PROCEDURE
9
os6976-en1.p65 5/20/2005, 12:09 PM12