Filter
Top Products
EN
4 –1/4” Spacers 4 – Washers
4 –1/2” Spacers 4 – Cord hooks
4 – 1” Spacers
4 – 2” Phillips head screws
1 – Mounting template
CAUTION: To reduce the risk of fire, do not place any heating or cooking product
beneath this unit.
• Select a location to mount the Kitchen Companion
• Make sure that there is an electrical outlet nearby
• Follow the section of Installing the Phone and Telephone Operation to check if the phone works
well at the selected location
• Follow the section of Radio Operation to check if the radio works well at the selected location
• Disconnect the AC power supply to the Kitchen Companion
when mounting.
Empty the contents of the cabinet under which the unit is to be mounted and thoroughly clean the
underside to remove any greasy residue. We recommend the unit be mounted at the front edge of
the cabinet.
IMPORTANT: For secure mounting, the screws must go into the unit to a depth of at least 3/8". If the
overall length from the bottom of the cabinet shelf to the bottom of the overhang is more than 5/8",
you will need to use a wood shim. The shim can be located between the cabinet shelf bottom and
the spacers. Make sure the wood is at least as thick as the excess over 5/8". If a shim is necessary,
longer screws (available at most local hardware stores) are required.
PrintedinChina
Model26976A
CUTOUT ON SOLID BLACK LINE.
CORTESOBRE LA LÕNEAS”LIDA NEGRA.
CUTOUT ON SOLID BLACK LINE.
CORTESOBRE LA LÕNEAS”LIDA NEGRA.
CUTOUT ON SOLID BLACK LINE.
CORTESOBRE LA LÕNEAS”LIDA NEGRA.
FoldGuidelines for
Cabinetwith overhang.
LÌneasde guÌa para ser dobladas
enla parte sobresaliente de los gabinetes.
Si no hayuna par te sobresaliente
la parte delantera de la Plantilla
debe ser igual con el borde
delanterodel Cabinete .
If no overhang
Frontedge of Template should
be evenwith front edge of Cabinet.
FRONT
FRENTE
CUTOUT ON SOLID BLACK LINE.
CORTESOBRE LA LÕNEAS”LIDA NEGRA.
SEE INSTRUCTION BOOK:
Be sure to select the correct height provided
spacers to position this unit at the proper distance
below the front edge of your cabinet. This will
provide access to the handset. Handset will be
slightly below the bottom of your cabinet when
properly installed.
MOUNTING HARDWARE PACKED WITH YOUR UNIT
BEFORE MOUNTING
8
os6976-en1.p65 5/20/2005, 12:09 PM11