Filter
Top Products
19
Your WLAN Handset 2212
Table 2 on page 20).
Use the Line key to access the Feature Keys
menu. Select these features by pressing the
number key associated with each feature.
Note: The Line key emulates the six
Feature Keys located at the top of an
IP Phone 2004 display area.
Use the Function key to access the handset
functions when in the active (idle) state (see
Table 3 on page 22).
The Function key also provides access to
the User Option menu in the standby state.
Soft keys (self-labeled) are located below
the display area. The LCD label above the
key changes, based on the state of the
handset. Use the four Soft keys (A, B, C, D)
to activate the displayed soft key feature.
Use the Up, Down, and Select buttons on the
side of the handset to navigate and activate
the various menu options.
Status indicators
A B
C D
J I H GF
These symbols give a visual indication (from strong to weak) of
the signal strength to the handset.
No Service
You are outside of the coverage area and cannot receive or place
calls. The “Out of Service” tone plays. Return to the coverage
area to re-establish the connection.
D C B These symbols give a visual indication of the battery charge.
The D indicates that the battery is fully charged, while the B
indicates that the charge is low.
A Your battery pack charge is very low. An audible beep also
sounds. Replace your battery pack within two minutes.
E
You have a new voicemail message.