Filter
Top Products
67
While on an active call
Use Call Park
Use the Call Park feature to hold temporarily (park) and retrieve a call from any
telephone or handset. Using Call Park does not tie up a line and, when configured
network-wide, can be used across networks. A System Park Extension can be
configured to automatically park most calls.
To park a call on the System Park DN
or your own DN:
During an active call, press the Park soft key
twice.
By default, the call is parked on your DN
unless a System Park is enabled to
automatically park calls on the system.
To park a call on a DN other than the
System Park DN or your own DN:
1. Press the Park soft key.
2. Dial the DN where you want to park the
call.
3. Press the Park soft key again.
Record a Calling Party Number
Use the Calling Party Number feature to record a caller’s number or charge a call to
an account number for accounting purposes during an established call.
To record a caller’s number for
accounting purposes:
1. Press the Call Party soft key to place
the caller on hold. The entered number
displays.
Park
Park
Park
Park
CPrt