Filter
Top Products
104
Quad Charger
Use the Quad Charger
To charge a battery pack:
1. Press both battery release buttons to
remove the battery pack from the
WLAN Handset 2212.
2. Insert the battery pack into one of the
four charging bays.
The LED above the charging bay turns
on. If the LED starts blinking as soon as
the battery pack is inserted, remove the
battery pack and reinsert it into the
charger.
If the LED continuously blinks during
the charging process, the battery pack is
unusable. Properly dispose of the
unusable battery pack.
3. When charging is complete, the LED
turns off. Remove the battery pack from
the charger.
Clean the Quad Charger
Clean the Quad Charger by wiping the surface with a plain-water-dampened cloth or
paper towel. A mild detergent solution can be used. Be sure to wipe away any
detergent residue with a plain-water-dampened cloth.
The battery pack contacts can be cleaned with isopropyl (rubbing) alcohol applied
with a cotton swab, cloth, or paper towel. Do not push or pull the exposed battery
pack contacts.
CAUTION
Do not immerse the charger in water or other liquid.
Do not pour liquids into the charger slot.