Filter
Top Products
31
Nortel Networks WLAN Handset 2210/2211 User Guide
WLAN Handset, headset, batteries, and chargers
This section contains information about:
• “Cleaning your WLAN Handset” on page 31
• “The headset” on page 32
• “Battery packs” on page 33
• “Desktop Charger” on page 35
• “Gang Charger” on page 37
• “Clean the Desktop Charger” on page 38
Cleaning your WLAN Handset
The WLAN Handset occasionally must be cleaned to maintain appearance. In general, wiping the
handset surface with a clean water-dampened cloth or paper towel removes most films or residues.
If more rigorous cleaning is required, you can use:
• A mild detergent solution. Be sure to wipe away any detergent residue with a plain
water-dampened cloth.
• Any general-purpose household glass and surface cleaner. Do not spray the handset directly.
Spray the cleaner on a soft cloth or paper towel, then wipe the handset.
• Pre-treated cloths, like those used for eyeglasses or cameras.
• Pre-moistened towelettes. Avoid those containing lanolin or aloe, which leave a slippery
residue.
• Isopropyl alcohol, applied by a damp cloth or paper towel. When using alcohol, do not rub the
keypad characters vigorously, as this will significantly degrade legibility.
If the headset connector becomes dirty, you may experience a scratchy or intermittent signal. To
clean the connector, dip the padded end of either a wooden- or paper-handled cotton swab in
isopropyl alcohol. Gently insert in the connector and twist, repeating several times. If available,
blow compressed air into the connector to clear debris.
IMPORTANT!
• Do not use furniture polishes, waxes, or plasticizer-based cleaner.
• Do not use lanolin, aloe, glycerin, or other skin care products.
• Do not apply any solvent such as acetone or mineral spirits.
• Do not directly spray or immerse the handset.