Nortel Networks 2210 Cordless Telephone User Manual


 
Feature and function menus 17
Nortel Networks WLAN Handset 2210/2211 User Guide
Feature menu – LINE key
Use the Feature menu to view and activate the WLAN Handset line features. These features are
programmed on each handset using the six line keys (number keys 1 through 6).
Note: A feature must be available on the system before it can be programmed on a handset.
Activate a feature
1 Place the handset in the active (idle) or active (off-hook) state.
2 Press to view the first screen of the Feature menu. Press again to view the second
screen.
3 Press the Up and Down buttons to scroll through the list of features. The abbreviation is
highlighted in the display area.
4 Do one of the following:
Press the Select button (or
OK) to activate the highlighted feature.
Press the number key (1 through 6) corresponding to the desired feature. The feature does
not have to be highlighted.
Program Feature menu items
You must be in the active (off-hook) state to program a Feature menu item.
External autodial
1 Press Feature *1.
2 Press and a number key (1 through 6) corresponding to an available key.
3 Dial the external number, including routing codes.
4 Press OK
to store the number.
Internal autodial
1 Press Feature *2.
2 Press and a number key (1 through 6) corresponding to an available key.
3 Dial the extension number.
4 Press OK
to store the number.
Features
1 Press Feature *3.
2 Press and a number key (1 through 6) corresponding to an available key.
3 Press Feature
and enter the feature code.