Filter
Top Products
19
Nortel Networks WLAN Handset 2210/2211 User Guide
Features, functions, and buttons
This section describes some of the WLAN Handset buttons and call features:
• “Basic call features” on page 19
• “Push-to-Talk” on page 22
Note: For more information about the features available to your WLAN Handset and how to use
them, refer to the Business Communications Manager Telephone Feature Card.
Basic call features
You can make external and internal calls using the following features:
• Make a call
• Answer a call
• Hold a call
• Use the headset
• Mute a call
Make a call
There are many ways to make a call, depending on your handset programming and the type of call.
External calls using line keys
1 Press to go off-hook.
2 Press to access the Feature menu.
3 Press a number key (1 through 6) corresponding to the desired line key.
4 Dial the external number.
External calls using intercom keys
1 Press to go off-hook.
2 Press to access the Feature menu.
IMPORTANT!
User MUST end every call
The user must end every call, by pressing the Power Off/End Call key, to
release system resources and allow the WLAN Handset to function properly.
If this is not done, it will result in the ringer not ringing and you might miss an
important call.