Filter
Top Products
Troubleshooting 27
Nortel Networks WLAN Handset 2210/2211 User Guide
Display messages
The following table lists the messages that can appear on your WLAN Handset. If a message
appears that cannot be resolved, contact your system administrator.
Table 5 WLAN Handset messages, descriptions, and actions (Sheet 1 of 3)
Message Description Action
3 chirps WLAN Handset is not able to
communicate with the best access
point, probably because that access
point has no bandwidth available.
None. This is only a warning. The
call will handoff to the best access
point once it becomes available.
(battery icon), Low Battery
message, and beep
Low battery In call: the battery icon displays and
a soft beep is heard when the user is
on the WLAN Handset and the
battery charge is low. User has 15–30
minutes of battery life left.
Not in call: The battery icon displays
whenever the battery charge is low.
The message Low Battery and a
beep indicate a critically low battery
charge. The WLAN Handset will not
work until the battery pack is
charged.
Battery Failure The battery pack is not functioning. Replace the battery pack with a new
or confirmed Nortel Networks
battery pack. Any non-Nortel
Networks battery packs will not
work.
Charging … The WLAN Handset is charging in
the Desktop Charger.
No action needed.
Charge Complete The WLAN Handset is now fully
charged.
No action needed.
Checking Code The WLAN Handset is checking for
a newer version of software that
should be downloaded.
None. This message lasts for
approximately one second. If
message remains displayed, power
off the WLAN Handset and contact
your system administrator.