Filter
Top Products
12 Getting started
N0009103 1.0
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
Set up Push-to-Talk
Push-to-Talk is available on the WLAN Handset 2211 only.
Push-to-Talk mode enables two-way radio communication with another WLAN Handset 2211
user. You can enable/disable Push-to-Talk mode and select a channel.
Set up Push-to-Talk for the handset:
1 Press when in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight
Push-to-Talk.
3 Press the Select button (or OK
) to select Push-to-Talk.
4 Press the Up and Down buttons to scroll through the menu and highlight one of the following
settings:
• Enable: Enables Push-to-Talk mode.
• Disable: Disables Push-to-Talk mode.
5 Press the Select button (or OK
) to select the setting.
6 If enabled, select a channel (1 to 8).
7 Do one of the following:
• Press UP
to return to the previous menu and set another option.
• Press to exit all menus and return to the standby state.
You can also press Exit
from the top-level menu to exit the menu and return to the active
(off-hook) state.
Adjust ringer volume
You can increase or decrease the ringer volume of the WLAN Handset 2211 only.
To adjust the ringer volume, press the Up or Down button while the handset is ringing.
Adjust speaker volume
You can increase or decrease the speaker volume of the WLAN Handset.
To adjust the speaker volume, press the Up or Down button while in a call.