Nortel Networks 2210 Cordless Telephone User Manual


 
26 Troubleshooting
N0009103 1.0
Press to exit all menus and return to the standby state.
You can also press
Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
View Current Call Server
The Current Call Server option shows the Call Server IP address and port number. This option is
for display purposes. You cannot edit this option.
View the Current Call Server:
1 Press when in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight
Current Call Svr.
3 Press the Select button (or
OK) to view the current call server IP address and port number for
the handset.
4 Do one of the following:
Press
UP to return to the previous menu and set another option.
Press to exit all menus and return to the standby state.
You can also press
Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
View Terminal Type
The Terminal Type option shows the handset type used by the system. The Terminal Type option is
for display purposes only. You cannot edit this option.
View the Terminal Type:
1 Press when in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight
Terminal Type.
3 Press the Select button (or
OK) to view the terminal type for the handset.
Note: The terminal type must be i2004. If it is not, please contact your system administrator.
4 Do one of the following:
Press
UP to return to the previous menu and set another option.
Press to exit all menus and return to the standby state.
You can also press
Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.