Filter
Top Products
The multiline function
62
Attention!
Your set is now programmed in multiline mode.
You can use the features assigned to your telephone set by assigning them as you desire
to the directory numbers at your disposal. Each directory number can also be programmed
with multikey mode (management of inquiry/transfer or consultation hold).
A set of 10 personal abbreviated numbers is assigned to each directory number.
Example: for two directory numbers, you have altogether 20 personal abbreviated numbers.
You have a voice mailbox associated with each directory number. The programming of
forward calls is performed separately using access passwords that can be different.
Note that certain procedures described in this guide differ when your set is programmed
in multiline mode. An additional operation is required when programming certain features:
the selection of the line to forward, for example, by pressing one of the multiline-programmed
keys. Always follow the instructions shown on the display.
Superv.
Extens.
Yes
Add
More
13 - Press the Superv. interactive key.
14 - Press the Extens. interactive key.
15 - Press the Yes interactive key to supervise your set.
The display shows the number of keys already programmed
with supervision mode for the first directory number.
16 - Press the More interactive key.
The display shows the number of keys already programmed
with supervision mode for the second directory number.
17 - Press the Add interactive key to validate
the new programming.
The display confirms the programming of the key.
Note: use the red key to cancel a setting or to terminate
the process.