Filter
Top Products
The multikey function
60
When you are talking with one correspondent and another cor-
respondent is on hold.
- Press the programmed key associated with the blinking icon.
The icon associated with the key of the correspondent in
conversation will be steadily illuminated and the display will
show his/her identity.
The icon associated with the key of the correspondent on hold
flashes.
Note: a multikey telephone set is perceived as free as long
as there is at least one position available, i.e. at least one
programmable key free.
Switching from
one correspondent to
another:
A telephone set used in multiline mode will have several directory numbers *. Each directory
number will be assigned to a programmable key.
This function is mainly used for programming the following on one telephone set:
- one so-called switchboard number, which you can make known to everyone;
- one so-called private number that you only make known to certain people;
it can also be an emergency number.
Examples:
For a manager: - unfiltered private number;
- number filtered by his/her assistant;
For an assistant: - private number for his/her own calls;
- number intended for taking filtered calls for the manager.
The multiline function*
Key
1
Key
2
* Depending on the features provided by your system operator.