Filter
Top Products
Page 68
Compact ICS 4.1 Programming Record P0906186 Issue 02
Room/desk information
Setting that allows the installer to assign sets to a room.
Show set:_
Indicate the set you wish to configure.
Room #:_
Indicate the room associated with the set.
Adm pwd reqd:
Indicate whether the set requires the use of the Hospitality Desk Admin password to access
Hospitality Desk features.
Call Restrns
Setting that allows the installer to assign dialing filters to room occupancy states.
Vacant
Setting that indicates the Room is empty.
Use flt:
Enter the dialing filter for the room state. The filters range from 00 to 99.
Basic
Indicates the filter to be assigned for that level of room occupancy.
Mid
Indicates the filter to be assigned for that level of room occupancy.
Full
Indicates the filter to be assigned for that level of room occupancy.
Service time
Setting that allows for the installer or system coordinator to program a system-wide time when
occupied rooms change state from Service done to Needs service.
Hour
Enter the hour.
Minutes
Enter the minutes.
Alarm
Setting that allows the installer to configure the Alarm operation.
Attn attempts:
Number of times the Alarm time feature attempts to get the attention of the occupant before
cancelling.
Retry intrvl
The interval period in minutes, between each Alarm attempt.
Attn duration
The period programmed in seconds for which a set alerts on each alarm attempt.
Time format
Choose if alarm times are entered using a 12 hour or 24 hour clock.
Telco features
This programming section lets you assign settings for external voice messaging services.
VMsg ctr tel#s
VMsg center 1
Tel#
VMsg center 2
VMsg center 3
VMsg center 4
VMsg center 5
Enter the telephone numbers (up to 24 digits) of the voice message centers. You can enter
numbers for up to five voice message centers.
ONN blocking
Allows outgoing name and number to be blocked at the called party end on both analog and
digital lines.
Analog VSC
Analog Vertical service code.
Tone
Vertical service code for analog tone dialing trunks.
Pulse
Vertical service code for analog pulse dialing trunks.
BRI VSC
Basic Rate Interface Vertical service code.
Code: