Filter
Top Products
Page 56
Compact ICS 4.1 Programming Record P0906186 Issue 02
Glossary of programming headings and settings
The dots next to each heading in this glossary, represent the programming hierarchy in the Norstar Compact ICS.
Profile
Select the Profile.
Dialpad
Select the Dialpad layout.
Startup
Template
Select the template to assign the default values for the system.
Start DN
Enter the DN of the first telephone. The Start DN must be between 2 and 7 digits in length. The
default DN length and default Received number length are also defined by the Start DN. If the
first digit of a DN is the same as the Direct-dial digit, the Call Park prefix, or the first digit of a
line pool access code, it sets them to None.
Terminals & Sets
This programming section lets you assign settings to each telephone.
Show set:_
Enter the DN of the telephone you want to program.
Line access
Assign lines to individual telephones. You can copy the settings from one telephone to another.
Line assignment
Line assignment allows you to determine which lines are assigned to the telephone and how
incoming calls on those lines will be handled.
Show line:_
Enter the line numbers of the lines to be assigned to the telephone.
Prime line
Select a prime line for the telephone. The prime line is the first line selected automatically for
making calls from the telephone. To select a line or line pool as prime line, the line or line pool
must have been assigned to the telephone.
Intercom keys
Select the number of intercom buttons on a telephone for accessing internal lines and line pools.
LinePool access
For each line pool (A to C), select whether a telephone will have access.
Answer DNs
Assigns answer buttons to a telephone so that it can monitor and answer calls for another
telephone. You can assign up to five answer DNs.
Show set
Enter the DN of the telephone for which this telephone will have an answer button.
OLI #
Enter a Network DN to be used for the Call Display information when this telephone makes an
outgoing call on a BRI line.
OLI as calld #
For some ISDN sets (for example, video conference sets) this allows the OLI digits to replace the
ISDN sets internal DN digits for proper call setup. (Profile 1 & 4 only.)
Capabilities
A programming section that lets you select the capabilities for each telephone.
Fwd no answer
Redirect all incoming calls when this telephone does not answer.
Fwd to
Enter the external number or the DN of the Norstar telephone to which you want to redirect all
incoming calls.
Forward delay
Select the number of rings before an unanswered call is forwarded. The heading appears only
if a Forward no answer external number or DN is assigned.
Fwd on busy
Redirect all incoming calls when this telephone is busy with another call.
Fwd to
Enter the external number or the DN of the Norstar telephone to which you want calls to be
redirected when this telephone is busy.
DND on Busy
Select whether or not an incoming call rings if the user is already on another call.
Handsfree
Select whether Handsfree will be available to a telephone.