Filter
Top Products
Page 60
Compact ICS 4.1 Programming Record P0906186 Issue 02
Name
You can name a line, if applicable, or the name defaults to the line number (for example,
Line001).
Restrictions
Lets you create and assign restriction filters which prevent a user from making certain kinds of
calls using a line.
Restrn filters
These are sets or groups of restrictions and associated overrides that specify the external
numbers or feature codes that cannot be dialed from a telephone or line.
Show filter:_
Enter the two-digit filter number.
Restrn 00
Filter 00 is pre-set with no restrictions.
Restrn 01
First programmable restriction. For each filter, enter up to 48 restrictions.
Deny
No overrides
Enter the digits you wish to be restricted when this filter is used.
Enter the dialing sequences which are allowed to override this filter, if any.
Line restrns
Designate restriction filters to the lines.
Normal
Night
Evening
Lunch
Sched 4
Sched 5
Sched 6
For each line, enter the number (two-digit) of the restriction filter to apply during normal service
and each of the schedules.
Remote restrns
In this section, you can assign restriction filters that apply only to remote users of the line.
Show line:_
Enter the number for the line you want to program.
Normal
Night
Evening
Lunch
Sched 4
Sched 5
Sched 6
For each line assigned to this telephone, enter the number (two-digit) of the restriction filter to
apply to remote use during normal service and each of the schedules.
Telco features
This programming section lets you assign settings for an external voice message service.
VMsg center
Assign a VMsg center to be used for voice message service for the line.
Services
A programming section that lets you create services for night ringing, routing and restrictions
for making external calls.
Ringing service
Assign additional telephones to ring for a line during specified periods of the day or night.
Ringing groups
Define groups of extended ringing sets.
Show group:_
Enter the number of the Ring group you want to program (01-20).