Filter
Top Products
Agent features
33
To record an activity, do the following:
1. When the Activity indicator flashes, click Activity.
2. Use the keypad to enter the activity code.
3. Click Activity again.
If performing multiple tasks, repeat steps 1 through 3.
Using Emergency
Use the Emergency feature to contact your supervisor immediately in an
emergency situation. The Emergency indicator remains lit as long as the
feature is active.
To use the Emergency feature, do the following:
1. During an active call, click Emergency.
When the supervisor picks up, a three-way call commences with you,
the supervisor, and the caller.
2. Click Emergency again to transfer the caller to the supervisor and
terminate your access to the call.
Using NotReady
Use the NotReady feature to take your telephone out of the call queue
while completing post-call work. The NotReady indicator remains lit as
long as the feature is active.
Note: If you don’t activate Make Set Busy or Not Ready, the system
will continue to direct callers to your phone.
To temporarily log out of the system, click NotReady.
To return to the queue, click NotReady or InCalls.