Filter
Top Products
dmc3-4
www.mssystems.com | 800.421.1587 | www.mssystems.com
Page 21
Test the System
After all connections have been made, insert the dmc3-4 power plug into
TE5C transformer and secure the master to the wall housing using the 2
screws provided. If using the dmc1F, dmc1FC or dmc1FM frame with a
dmc1CD player, install the master unit over the frame. Do not over
tighten the screws as the plastic may distort or crack. Install the speaker
panel on the master as shown in Figure 20.
Please be careful to only apply pressure on the speaker panel at the
corners and not in the middle. Check all functions by following the
guidelines in the Owners Manual shipped with the master unit. If any
difficulties are encountered, recheck all connections. If after reviewing
these instructions you are unable to resolve any problems, contact
technical support at 1-800-421-1587.
Figure 20 - Speaker Panel Placement
$QEG$QEG 1.1.