Filter
Top Products
Mitel 5603 Wireless Handset User Guide
46
4. The handset starts to search for IP-DECT systems and will subscribe to the system when
it is found.
Notes about Subscribing Handsets and Hot Desking
If the handset is subscribed, but not registered with MiVoice Business or 5000 CP, the handset
will display the following message: "Please login".
• When subscribing the handset to the IP-DECT Base Station, enter the leading 0’s of the
PARK code. Removing the 0’s will prevent subscription.
• After registering the handset with MiVoice Business or the 5000 CP using the System ID,
Extension, and auth password, the "Please Login" message is removed from the handset.
• If you are unable to subscribe the handset, ask the administrator to remove the handset
IPED from the user in the IP-DECT Base Station, if the IPED was pre-programmed for the
user.
If the handset is configured as a Hot Desk handset, then "Please Login" appears for the user
to enter hot desk information.
Subscribe Handset in IP-DECT System Manually
To subscribe an IP-DECT system manually, the “Park:” (Portable Access Right Key) and “Ac:”
(Authentication code) related to the system are needed. Contact the system administrator for
more information. If the handset subscribes to an additional system, it must also be added
manually.
The IPEI/IPED code is a unique code which has been assigned to the handset. See also Admin
Menu on page 48.
1. Select "System".
2. Select "Subscribe".
3. Enter System name (optional). If no system name is entered, the default name will be used.
That is System A, System B, depending on which system name is free.
4. Press "Next".
5. Enter PARK code (max. 31 digits). The PARK code may not be required if there is no alien
DECT system within the coverage area.
6. Enter AC code. Press "Next".
An information text "Protection on?" appears.
7. Select "Yes" if the new system needs to be protected. It is not possible to delete a protected
subscription from the System menu
1
.
Note: If no system is found within 2 minutes or "Cancel" is pressed, the handset’s
subscription menu is displayed. Continue with step 5 in the procedure Subscribe
Handset in IP-DECT System Manually on page 46 for more information.
Note: The PARK code may not be required if there is no alien DECT system within the
coverage area.