Filter
Top Products
Navigate the Menu
45
2. Select “Redirect”.
Switch off While Charging
When the handset is placed in the charger it can be switched off. When removed from the
charger it will switch on again.
1. Select “In charger”.
2. Select “Switch off”.
Mute Handset While Charging
When the handset is placed in the charger it can be muted while it is charging. When it is
removed from the charger it will switch on the sound again.
1. Select “In charger”.
2. Select “Sound off”.
Deactivate the Charging Mode
1. Select “In charger”.
2. Select “No action”.
System
Change System
Select “Automatic” or a specific system. If the handset is set to “Automatic” it selects a system
according to the priority list. See Priority on page 47.
Subscribe Handset in IP-DECT System using Easy Registration
A handset can subscribe to an IP-DECT system automatically if the following are fulfilled:
• The IP-DECT system is configured for Easy Registration; see the Mitel IP-DECT Base
Station Installation and Operation Guide.
• The handset’s extension number and IPEI are registered in the IP-DECT system, see the
corresponding manual for the IP-DECT system.
• The handset is not subscribed to any systems.
• The handset software is version 4.0.2 or greater.
1. If needed, switch off the handset by pressing .
2. Switch on the handset by pressing .
3. Select language to be used or press "Cancel". If Cancel is pressed, the default language
(English) will be used.
Note: The settings in the system determines how the incoming calls will be handled.
This is a system dependent feature.