Filter
Top Products
General Information Guide - Release 3.1
- 60
Feature Name: Description:
Suite Service Suite Service provides the ability to group a number of telephone
lines through interconnected hotel/motel rooms, or suites, for the
purposes of billing and shared telephone service.
Swap Swap lets you temporarily suspend a telephone call while you
originate a new call. Once the new call has been established, you
can alternate between the two calls.
Switchhook Flash See Flash - Switchhook.
System Access Authorization Administrative access to the system is controlled by passwords.
Different passwords are assigned for each of the five levels of
access.
System Alarm Indications See Alarms and Attendant Console Status Display.
System Fail Transfer See System Fail Transfer.
T1/D4 Provides support for T1 Channel Associated Signaling. A Dual T1
card is required.
TAPI Support Supports MiTAI and TALK TO TAPI computer telephony interfaces.
Tandem Trunking The system can transparently interconnect trunk circuits originating
from one CO or PBX and terminating on another (tandem trunking)
without attendant intervention.
Telephone Directory - Privacy
Option
Any extension number in the system telephone directory can be
designated as private. When an extension number is private, the
number is not displayed on other users’ telephones.
Tie Trunk Support Tie trunks terminate on the attendant console, at station sets, in
hunt groups, or on night bells. They may also be arranged as dial-
in tie trunks or tandem trunks. Like CO trunks, tie trunks are
arranged in groups.
Timed Reminder See Reminder.
Toll Control Toll control allows or denies access to specified routes, CO
exchanges, and directory numbers.
Tone Demonstration
Tone Demonstration lets you hear the tones provided on the
system.
Tone Detection
The system can detect and analyze call progress tones that
originate from the central office during the course of a trunk call.
Tone Plan Flexibility Call progress and supervisory tones generated within the system
are programmed to meet the requirements of the telephone
authorities of the country in which the system is installed.
Traffic Reporting Provides traffic reports based on system usage to allow better
system resource management.
Transfer Transfer lets you move a call from one telephone to another.
Before completing a Transfer, you can consult privately with the
third party and swap between private conversations with each of
the parties.
Transmission Tests Transmission Tests let you perform the following tests on a trunk:
milliwatt test, balance test, and 100 test.
Trunk Access Trunk Access lets you access a specific trunk directly. No toll
control or ARS checking is done when you use Trunk Access. This
feature is used when a maintenance telephone is required