Mitel 3300 IP Phone User Manual


 
General Information Guide - Release 3.1
- 7 -
Mitel Networks 3300 Analog Services Unit
The Mitel Networks 3300 ASU is the On-Premises Station (ONS) Line unit and supports up to 24
ONS CLASS ports. It connects to a 3300 Controller by using a Category 5 UTP cable that terminates
on an 8-pin modular jack (RJ-45).
For detailed information on the hardware specifications, refer to the Hardware User Guide.
Migration
Migration
The 3300 ICP offers the ability to migrate from an existing SX-2000 MICRO LIGHT, SX-2000 LIGHT,
or 3200 ICP. The database is converted and restored onto the 3300 ICP by using the Mitel Networks
3300 Configuration Tool.
Mitel Networks SX-2000 MICRO LIGHT
By installing a triple FIM card in the SX-2000 MICRO LIGHT main cabinet, you can physically connect
it to the 3300 ICP by using multi-mode fiber. As a result, you can use the existing peripheral and
digital trunk cards within the main cabinet. Any external cabinets can also be connected by using
FIMs.
Mitel Networks SX-2000 LIGHT
The SX-2000 LIGHT Digital Services Unit (DSU) cabinet provides digital trunk capability, and the
SX-2000 LIGHT peripheral cabinet provides connectivity for analog trunks, analog telephones, and
Mitel Networks DNI devices. Both cabinet types can be connected to the 3300 Controller by using
multi-mode fiber connections.
The DSU cabinet supports BRI, PRI, T1/D4, MSDN/DPNSS, and DASS II trunks.
The peripheral cabinet supports the following analog trunks: Analog CO trunks, E&M trunks, and
Direct Inward Dial and Tie Trunks. It also supports the following DNI telephones and devices:
SUPERSET 401
SUPERSET 401+
SUPERSET 410
SUPERSET 420
SUPERSET 430
SUPERSET 4001
SUPERSET 4015
SUPERSET 4025
SUPERSET 4125
SUPERSET 4150
SUPERCONSOLE 1000
®
Mitel Networks Analog Interface Module.
For additional information, refer to SX-2000 technical documentation.